3 Three Four Blades Wings Step Drag Bits , Deep Rock Well Drilling Bits

Three Wings 3 Blades Step Drag Bits Chevron Drag Bits Step Bits

Product specifications:

A drag bit is simply a series of blades (usually three or four in number) which produce a shearing

action when rotated. They are comparatively inexpensive due to the lack of moving parts and theycan penetrate softer formations such as stiff clays and mudstones very quickly.The drag bit

usually used in very soft to medium formation when the dth hammer as the tricone bit, lose of

their effectiveness.The cleaning of the hole is realized by the injection of air or water.

There are two forms of drag bits:
- "Step" type for soft grounds
- "Chevron" type for medium hard grounds

Specification of three wings drag bit :

Drag bits are economical tools when drilling softer geological formations and shallower depths. Sinodrills is the biggest supplier of drag bits in China, we supply both step drag bits and chevron drag bits. Chevron drag bits are usually used for drilling more abrasive formations like soft sandstons and shales. Chevron drag bits are more durable than step drag bits because of cutting structuer, but penetrate more slowly. We offer a comprehensive range of step drag bits as below:

Drag bits diameters: 3 7/8” ~ 26”;
Connection threads: N-Rod, AW, 2 3/8’’ API Reg, 2 7/8’’ API Reg, 3 1/2’’ API Reg, 4 1/2’’ API Reg, 6 5/8’’ API Reg, 2 7/8’’ API IF, etc.
Wings: Three wings, four wings;

We can also provide related products DTH button bits, ODEX, symmetric overburden systems, slide block drilling systems, etc and DTH drilling pipes for various thread API REG, API IF, BECO, etc

Product Photos:

step drag bits

chevron drag bit

3 Three Four Blades Wings Step Drag Bits , Deep Rock Well Drilling Bits Images